FAQ

No, the room temperature is maintained at 30 to 37 ° C when using Pure Infra® products. It is suitable for families to wear light and comfortable clothes for a long time.

Pure Infra TM is safe and reliable, and has been tested and certified by Seibersdorf laboratory, GmbH. Pure Infra ®'s infrared light wave technology also meets the safety standards of the International Atomic Energy Agency.

Not suitable for use during pregnancy.

Will not. The energy-efficient design minimizes power consumption, and its system saves power compared to ordinary hair dryers.

• Refrigerator - 6.5 mG

• Bath exhaust fan - 145 mG

• Microwave oven - 259 mG

• Electric Dryer at control panel - 28.1 mG

• 47 "Sony LCD TV - 4 mG

• New IR CarbonFlex emitters - ≤ 2 mG

• Old IR CarbonFlex emitters - 10-25mG

Can. Unlike traditional saunas, the temperature and humidity in the sauna room will be maintained at a reasonable level to allow electronic products to operate normally, but it is not recommended to place electronic products directly near the infrared panel. The built-in WIFI function in the infrared room, built-in high-level audio, you can enjoy your favorite music, and also built-in reading lights, you can choose your own leisure books to bring to the sauna room to read and enjoy quiet moments.

Pure Infra ® products do not need to be warmed up. They can be used after plugging in the power supply and selecting the use mode. And it is particularly convenient to use, which can be switched with one key.

Boot steps

Switch on > Select the time, Turn on the light > Automatically adjust the temperature

The installation of Pure Infra ® is similar to that of a wardrobe. All the accessories are completed in the factory. No additional fixtures are required during installation. You only need to reserve a traditional power outlet to connect to the power supply.

Internal parts

FR4 à copper trace à carbon ink printing à curing à

FR4 compression à drill solder area à testing à wire soldering

(rider)

For each use, it is recommended to be naked or to wear a swimsuit, so that most of the body is exposed to infrared light waves as much as possible to achieve the best results. After use, you can use a semi-dry cloth to gently wipe the seat, back, and floor (where sweat drips).

Unlike traditional saunas, Pure Infra® does not generate moisture or water. The stability of the room is as high as 50’C, which will evaporate the sweat, so there is no need to install a drainage system.

The non-commercial infrared emitting board has a maintenance period of ten years, and the commercial infrared emitting lamp has a two-year warranty.

Generally, the sauna is not only equipped with a drainage system, but also consumes a lot of power. Pure Infra® has the advantages of low maintenance cost and easy to use.